|
Using Cinchstrap
CINCHSTRAP is flexible but tough and durable flat plastic lath. It has a clean white color. It is 1 3/8" wide and is made of high-density poly, exactly the same material used in our Polyfastener, but thinner.
USES FOR CINCHSTRAP
USE CINCHSTRAP AS A LATH SECURING POLY TO RAFTERS, STUDS, or PERIMETERS
Many prefer Cinchstrap instead of wooden lath. Cinchstrap looks better, does not need painting and is easy to cut with scissors (I don't like sawing wood lath, I would rather have fun mulching my garden).
USE CINCHSTRAP AS AN ABRASION REDUCER BENEATH THE POLY
If the poly flaps in the wind and rubs against rough unsanded wooden studs or rafters accelerated weathering of the poly occurs. So sand those rafters. In addition to or instead of sanding some nail Cinchstrap onto the rafters, so that the smooth Cinchstrap reduces abrasion. Some commercial greenhouse owners use strips of our woven poly instead, as batten tape beneath the main poly cover. That's great! You can make your own out of our woven poly, but Cinchstrap lasts longer. If Cinchstrap
is employed for both uses #1 & #2, then the poly is protected on both sides like a slice of cheese between two slices of bread. (But without the mustard!)
USE CINCHSTRAP AS A TENSION STRAP TO REDUCE FLAPPING
It is recommended to stretch some form of strap over the arches of greenhouses if the poly is attached only along the perimeter but not nailed to the rafters. (e.g. on Quonset greenhouses.) Otherwise, the poly may flap in strong winds. Our Cinchstrap can be installed about every eight feet or so along the length to control flapping. Cinchstrap will dampen or baffle the flutter. This reduces danger of the poly tearing while flapping and reduces stress on the poly around the perimeter. It's
an extra safety precaution during high winds, much like securing a truck tarp to control flapping. This may not work in hurricane force winds! Cinchstrap gets nailed securely down at one end, then thrown over the top across the width of greenhouse and nailed down securely at the other side. When installing, stretch and pull it tightly like a gigantic rubber band. Use LARGE-headed long shingle nails. Cinchstrap is smooth against the poly, attractive, strong, tough, flexible and easy to work
with.
USE CINCHSTRAP FRAMES FOR "INSTANT" REPAIRS & PRIVACY WINDOWS!
When the glass breaks in our shed or outbuilding windows I simply quickly re-cover with woven poly. I get tired of finding and cutting strips of wood to tack the poly to the frame and anyway I don't like the bother of painting each strip. So one day I tried using Cinchstrap and boy did it go fast! It took me just a few minutes! And it looked neat with its bright white profile. Just snip each piece with sharp scissors and tack down with shingle nails or smaller. I did some quick storm
windows (our woven poly) on the house with it too. Woven poly is great on windows where you want privacy, like the bathroom, since you're not in there to look outside anyway! That extra layer of woven poly on the outside cuts heat loss and frost on the inside of the window.
USE CINCHSTRAP TO ATTACH "TEMPORARY" POLY WINDOWS
If you use small-headed or finishing nails to hold down the Cinchstrap then in spring you can just give a strong yank and the Cinchstrap will pull away with a snap. The strap can be reused if you are careful taking it off.
USE CINCHSTRAP WOVEN AS A PRIVACY SCREEN OR WINDSCREEN IN FENCING
Cinchstrap can be woven in and out of a chain link fence, blocking the wind and providing privacy.
OTHER USES
Cinchstrap is handy for securing plastic to plant benches and we used it to hold down the woven poly to the ceiling and four walls inside our chicken shed. (This keeps our shed airtight and warmer and protects the insulation from the water vapor given off from the chickens
(There are many other uses for Cinchstrap. what you come up with that's new.)
INSTALLING CINCHSTRAP
Cut off desired length, using a Stanley knife or sharp scissors, nail down one end, pull it as tight as possible until it stretches a bit, then nail down the other end, and then nail in between. Pulling it tightly prevents stretching in hot weather. If, like us, you get high winds and buffeting, then use long large-headed roofing nails to prevent the Cinchstrap from tearing out at the nail points.
HOW TO RE-USE CINCHSTRAP
If your winds are not high, and you want the Cinchstrap nailed down for only a short time, and if you want to re-use it again, just nail every few inches with very small headed nails such as finishing nails. Later you'll be able to pull it out (using a strong quick jerk) with no damage except for the small nail holes. The Cinchstrap is broad enough to re-nail.
For more information about
Cinchstrap, click here.
|
